To set up your email in Outlook you need three things: choose IMAP, use your server's name as both incoming and outgoing server, and turn on SSL for both. The full details are below, with the step-by-step and the errors we see most often.
First, the decision: IMAP or POP3
| IMAP | POP3 | |
|---|---|---|
| Where your emails live | On the server | Downloaded to your computer |
| If you open them on your phone | You see the same as on the PC | The phone may never see them |
| If your computer breaks | Your emails are safe | You lose them |
| Uses mailbox space | Yes | No, if it deletes them from the server |
Choose IMAP. It is the right answer in practically every case, and the only one if you use email on more than one device. POP3 downloads messages and, depending on its settings, tells the server to delete its copy after some days: that is how “emails older than two weeks disappear”. If you are on POP3 and want to switch to IMAP, write to us before changing anything: the emails that now exist only on your computer have to be secured first.
The details you need
| Incoming server | Your server's name, in the form cpanelN-co.conexcol.net |
| Incoming port | 993 with IMAP · 995 if you use POP3 |
| Outgoing server | The same server name |
| Outgoing port | 465 |
| Encryption | SSL for incoming and outgoing |
| Username | Your full email address |
| Password | That mailbox's password — not cPanel's or the portal's |
Where to find your server's name: it is in your hosting account's welcome email, on the “Server Information - Server:” line. If you cannot find it, write to us and we will confirm it.
Do not use mail.yourdomain.com as the server. That name exists, but the mail service presents the server's certificate, not your domain's, so with SSL you get a name-mismatch warning. Use the server name and you will not.
In the new cPanel, each email account's Connect device tab shows mail.yourdomain.com as the server. Use your server name (cpanelN-co.conexcol.net) anyway: it is the one that avoids the certificate warning.
Two details cause most failures: the username is the full address (not john, but john@yourcompany.com), and you must tick that the outgoing server requires authentication. Without it you can receive but not send.
Step by step in Outlook
- Add a new account, type your full email address and choose to set it up manually.
- Account type: IMAP.
- Incoming and outgoing server: your server's name (cpanelN-co.conexcol.net), the same for both.
- Username: your full email address. Password: that mailbox's password.
- Open “More Settings”.
- On the “Outgoing Server” tab, tick “My outgoing server (SMTP) requires authentication” and leave “Use same settings as my incoming mail server” selected.
- On the “Advanced” tab, set incoming server (IMAP) to 993 and outgoing (SMTP) to 465, and choose SSL for both.
- Accept, finish and let it sync. The first time can take a while with a large mailbox.
For an existing account: File → Account Settings → Account Settings → double-click the account → More Settings → Advanced. If an account has been failing for a long time, deleting it from Outlook and creating it again with the details above usually fixes it. With IMAP you lose nothing; with POP3, write to us before deleting it.
If you must stay on POP3 for now
In the account's Advanced settings, tick “Leave a copy of messages on the server” and raise the number of days it keeps them: that copy also expires. Treat it as temporary; the real fix is moving to IMAP. See How can I keep a copy of messages on the server when I use POP?
The four most common errors
- “Wrong password” when it is right: you are typing only the username instead of the full address, or the cPanel/portal password instead of the mailbox's, or the password was changed elsewhere. If Outlook keeps retrying with a wrong password, the server blocks your IP and the whole office loses email; see Why your IP was blocked.
- I receive but cannot send: check the “requires authentication” box, port 465 and SSL. Some networks block that port; if sending works from mobile data but not from the office, that is it. Port 587 with TLS/STARTTLS is also enabled — tell us and we will test it with you.
- A certificate warning: almost always because you used mail.yourdomain.com. Do not accept it; use the real server name.
- It connects but nothing downloads: if another device used POP3, messages may no longer be on the server. You can restore them yourself: see How to restore a backup using JetBackup.
Frequently asked questions
Can I have the same account in Outlook and on my phone? Yes, with IMAP. I changed the email password, what now? Update it on every device using that account; any device left with the old one can get the office IP blocked. Is Outlook on the web the same? No: this guide is for Outlook installed on your computer; in the browser, use webmail. The “new Outlook” for Windows? Same details (server, 993, 465, SSL, full username); only the screens change. Rather have you do it? Write to us and we will set it up with you by remote assistance.
If Outlook still will not connect, write to us from the portal with the email address, the exact error (copied or a full screenshot) and whether it fails when receiving, sending or both.
More information
- Article (Spanish): Configurar tu correo en Outlook
- Video (Spanish): Cómo configurar tu correo en Outlook